Connectivity options offer maximum flexibility
Connectivity options are available to suit nearly any communication
requirement. The standard unit is equipped with a RS-232 serial
communications port and a built-in USB port (5000 and 6000 VA models)
to interface with power management software. You can customize your
UPS by adding any of the following X-slot interface options for other types
of communications:
ConnectUPS Web/SNMP Interface Card
enables direct control and monitoring in
SNMP-based networks, plus the ability to
monitor UPS status and meters through a
Web browser (includes built-in switch hub)
Multi-server Card enables up to six serially
connected devices of mixed operating sys-
tems to be independently managed and
controlled by a single UPS
Relay Interface Card provides dry-contact
interface between the UPS and any relay-
connected device, including the IBM
®
eServer
®
iSeries (AS/400) and a variety of
industrial applications
Environmental Monitoring Probe (EMP)
works with the ConnectUPS Web/SNMP
card, remotely monitoring temperature,
humidity, and the status of two
contacts/sensors, such as smoke detector
and open-door detector
Easily service the UPS without interrupting power
to protected systems
LEDs on the front panel of the Powerware 5125
indicate the presence of alarm conditions, battery
utilization, bad or low batteries, site wiring faults, and
incoming utility power, as well as current load levels
relative to UPS capacity.
When batteries reach the end of their useful life, or
electronics modules require service, replacement is
easy. With simple access through the front panel,
users can install new battery and electronics modules
without ever powering down connected servers or
removing the unit from the rack.
The key is an internal automatic bypass feature
(available on 2400 VA–6000 VA models) that allows
the UPS to continuously provide power to critical
equipment while you’re working on the system. Even
if you pull out the electronics, the UPS keeps doing
its job.
Hot-swappable battery modules -
when batteries reach the end of their
useful life, replace battery modules
without powering down connected
equipment (available on all models)
Hot-swappable electronic
modules - replace electron-
ics modules without shutting
down connected equipment
(available on 2400 VA to
6000 VA models)
EMP
ConnectUPS-X
Web/SNMP card
Powerware 5000/6000 VA rackmount model
Powerware 5125 6000 VA
rackmount hardwired model
(4 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals