Rackmount VA 6000 User's Guide download pdf (Page 46)

OPERATION

Eaton 5125 Rack-Mount UPS (5000/6000 VA) User's Guide S 164201541 Rev D

www.eaton.com/powerquality

Turning the UPS Off

NOTE Pressing the Off button while the UPS is in Battery mode causes the UPS to shut

down immediately.

To turn off the UPS:

1. Prepare your equipment for shutdown.

2. Press and hold the Off

button for approximately three seconds.

The



indicator begins to flash. The UPS transfers to Standby

mode (if utility power is available) and removes power from your

equipment.

3. Unplug or remove utility power from the UPS; the UPS shuts down

in 30 seconds. The load level and battery indicators flash briefly

prior to shutdown.

If you do not unplug or remove utility power from the UPS, it

remains in Standby mode.

Initiating the Self-Test

Press and hold the button for three seconds to initiate the self‐test.

The indicators cycle through slowly during the test. If the alarm beeps or

a UPS alarm indicator stays on, see Table 10 on page 66.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 79 80

No comments

Rackmount VA 6000 User's Guide Page 46