Rackmount VA 6000 User's Guide download pdf (Page 9)

Eaton 5125 Rack-Mount UPS (5000/6000 VA) User's Guide S 164201541 Rev D

www.eaton.com/powerquality

Chapter 2 Safety Warnings

IMPORTANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS

This manual contains important instructions that you should follow during installation and

maintenance of the UPS and batteries. Please read all instructions before operating the

equipment and save this manual for future reference.

D A N G E R

This UPS contains LETHAL VOLTAGES. All repairs and service should be performed by

AUTHORIZED SERVICE PERSONNEL ONLY. There are NO USER SERVICEABLE PARTS

inside the UPS.

W A R N I N G

S This UPS contains its own energy source (batteries). The output receptacles may carry

live voltage even when the UPS is not connected to an AC supply.

S For 200–240V models, the output receptacles may remain electrically live. If the input

power source in your application is wired line-to-neutral (as in most European

applications), the voltage to the output receptacles is 0V. With line-to-line input wiring,

the voltage to the output receptacles is 100–120V (measured from line-to-ground or

line-to-neutral, depending on the UPS wiring).

S Do not remove or unplug the input cord when the UPS is turned on. This removes the

safety ground from the UPS and the equipment connected to the UPS.

S To reduce the risk of fire or electric shock, install this UPS in a temperature and humidity

controlled, indoor environment, free of conductive contaminants. Ambient temperature

must not exceed 40°C (104°F). Do not operate near water or excessive humidity (95%

maximum).

S For UPS models with hardwired outputs, overcurrent protection for the output AC

circuit(s) is to be provided by others.

S For UPS models with hardwired outputs, suitably rated disconnect switches for the

output AC circuit(s) are to be provided by others.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 79 80

No comments

Rackmount VA 6000 User's Guide Page 9